www.ukengineforum.forumotion.com
Please log in , the forum is open to guests who are now able to view most sections, feel free to become a member , you will then be able to post and reply to topics.

Join the forum, it's quick and easy

www.ukengineforum.forumotion.com
Please log in , the forum is open to guests who are now able to view most sections, feel free to become a member , you will then be able to post and reply to topics.

wico style mag removele

2 posters

Go down

wico style mag removele Empty wico style mag removele

Post by Admin Wed Aug 26 2009, 14:18

hi when removing a wico mag of an engine such as a wolseley, do you have to mark the cogs,and the mag at the point of removale if that makes any sense lol!

Admin
Admin

Posts : 4916
Join date : 2009-07-21
Age : 72

https://ukengineforum.forumotion.com/

Back to top Go down

wico style mag removele Empty Re: wico style mag removele

Post by JONESEY Wed Aug 26 2009, 14:25

No on wolsleys you have all your timing Marks on the cogs, Very easy you take your govner side plate off and you can see the marks on the camshaft gears.
When puting Mag back on after you have restored it ,Set it into the middle of the slots.
Hope this makes sense Smile
Chris
JONESEY
JONESEY
Admin

Posts : 2848
Join date : 2009-07-21
Age : 61
Location : Verwood, Dorset

Back to top Go down

wico style mag removele Empty yep thankyou

Post by Admin Wed Aug 26 2009, 14:48

JONESEY wrote:No on wolsleys you have all your timing Marks on the cogs, Very easy you take your govner side plate off and you can see the marks on the camshaft gears.
When puting Mag back on after you have restored it ,Set it into the middle of the slots.
Hope this makes sense Smile
Chris

thankyou

Admin
Admin

Posts : 4916
Join date : 2009-07-21
Age : 72

https://ukengineforum.forumotion.com/

Back to top Go down

wico style mag removele Empty Re: wico style mag removele

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum