www.stationaryengineforum.net
Please log in , the forum is open to guests who are now able to view every section, feel free to become a member , you will then be able to post and reply to topics.

Gasket paper

View previous topic View next topic Go down

Gasket paper

Post by Abes on Wed Apr 11 2012, 20:02

Quick question, need to redo the gasket on the carb on the PAB just wondered what thickness gasket paper i should be using and if it makes any diffrence

_________________
affraid A stationary engine is like peeing your pants, everyone can see it but only you get that nice warm feeling: affraid

Abes
Admin

Posts : 1271
Join date : 2011-07-24
Age : 57
Location : Ringwood

Back to top Go down

Re: Gasket paper

Post by matt86 on Wed Apr 11 2012, 20:41

Abes wrote:Quick question, need to redo the gasket on the carb on the PAB just wondered what thickness gasket paper i should be using and if it makes any diffrence

on a carb i would say thinnish paper Abes depending if the mating surfaces are flat .

Matt

matt86
Admin

Posts : 5581
Join date : 2011-03-29
Age : 30
Location : swindon/ faringdon

Back to top Go down

Re: Gasket paper

Post by Abes on Wed Apr 11 2012, 21:05

Cheers mate surfaces look pretty good so how thin are we talking then mate

matt86 wrote:
Abes wrote:Quick question, need to redo the gasket on the carb on the PAB just wondered what thickness gasket paper i should be using and if it makes any diffrence

on a carb i would say thinnish paper Abes depending if the mating surfaces are flat .

Matt

_________________
affraid A stationary engine is like peeing your pants, everyone can see it but only you get that nice warm feeling: affraid

Abes
Admin

Posts : 1271
Join date : 2011-07-24
Age : 57
Location : Ringwood

Back to top Go down

Re: Gasket paper

Post by matt86 on Wed Apr 11 2012, 21:19

Abes wrote:Cheers mate surfaces look pretty good so how thin are we talking then mate

matt86 wrote:
Abes wrote:Quick question, need to redo the gasket on the carb on the PAB just wondered what thickness gasket paper i should be using and if it makes any diffrence

on a carb i would say thinnish paper Abes depending if the mating surfaces are flat .

Matt
1-2 mm mate , that should do fine .

whats the worst that could happen lol

matt

matt86
Admin

Posts : 5581
Join date : 2011-03-29
Age : 30
Location : swindon/ faringdon

Back to top Go down

Re: Gasket paper

Post by JONESEY on Wed Apr 11 2012, 23:14

It will draw in air and will not run Laughing 2.5 to 3 mm none absorbent paper, if your stuck I have some here
Jonesey

JONESEY
Admin

Posts : 2850
Join date : 2009-07-21
Age : 54
Location : Verwood, Dorset

Back to top Go down

Re: Gasket paper

Post by ian webb on Wed Apr 11 2012, 23:20

Damn so that 3ply absorbent tissue from Lidls is gonna let me down then, lol! lol! lol! lol!

_________________
Nelson Jumbo 1 3/4hp ,Petter M 3hp appletop, 1940 LISTER D with sheep shearing, 1951 Lister D reverse rotation, H1 H2 H3 pumps, Climax no2 pump,

ian webb
Life Member
Life Member

Posts : 660
Join date : 2009-08-27
Age : 51
Location : christchurch dorset

Back to top Go down

Re: Gasket paper

Post by stationary stu on Thu Apr 12 2012, 13:02

ian webb wrote:Damn so that 3ply absorbent tissue from Lidls is gonna let me down then, lol! lol! lol! lol!

Yes Ian you should have used Aldi's toilet tissue non absorbent and your unable to tear it... Perfik lol! lol! lol!

Stu.

_________________
Engines are just like Pringles .... one is never enough.  Very Happy                                        I used to love tractors all I would ever think/talk about. Then one day out of the blue I went on to statinary engines, So you could say I'm an extractor fan.

stationary stu
Life Member
Life Member

Posts : 8962
Join date : 2009-07-21
Age : 58
Location : Stanley, Co. Durham.

Back to top Go down

Re: Gasket paper

Post by ian webb on Thu Apr 12 2012, 16:10

Stu i knew ive been going wrong somewhere, should never have gone for the cheaper one then
Ian,
PS Sorry Abes for hijacking your thread with nonsense, lol

_________________
Nelson Jumbo 1 3/4hp ,Petter M 3hp appletop, 1940 LISTER D with sheep shearing, 1951 Lister D reverse rotation, H1 H2 H3 pumps, Climax no2 pump,

ian webb
Life Member
Life Member

Posts : 660
Join date : 2009-08-27
Age : 51
Location : christchurch dorset

Back to top Go down

Re: Gasket paper

Post by Abes on Thu Apr 12 2012, 18:21

LOL not a problem mate id keep hold of all that cheap bog paper you've got will come in real handy in case the old inconternance pants give out when your at a rally lol! lol!

ian webb wrote:Stu i knew ive been going wrong somewhere, should never have gone for the cheaper one then
Ian,
PS Sorry Abes for hijacking your thread with nonsense, lol

_________________
affraid A stationary engine is like peeing your pants, everyone can see it but only you get that nice warm feeling: affraid

Abes
Admin

Posts : 1271
Join date : 2011-07-24
Age : 57
Location : Ringwood

Back to top Go down

Re: Gasket paper

Post by Abes on Thu Apr 12 2012, 18:23

Cheers for the kind offer, will try and get some this weekend if no joy ill give you a shout if thats ok

JONESEY wrote:It will draw in air and will not run Laughing 2.5 to 3 mm none absorbent paper, if your stuck I have some here
Jonesey

_________________
affraid A stationary engine is like peeing your pants, everyone can see it but only you get that nice warm feeling: affraid

Abes
Admin

Posts : 1271
Join date : 2011-07-24
Age : 57
Location : Ringwood

Back to top Go down

Re: Gasket paper

Post by JONESEY on Fri Apr 13 2012, 00:04

No probs
Jonesey

JONESEY
Admin

Posts : 2850
Join date : 2009-07-21
Age : 54
Location : Verwood, Dorset

Back to top Go down

Re: Gasket paper

Post by Abes on Mon Apr 16 2012, 18:12

Hi Jonesey thanks again for the kind offer but managed to get some at the weekend so all sorted now thanks again

_________________
affraid A stationary engine is like peeing your pants, everyone can see it but only you get that nice warm feeling: affraid

Abes
Admin

Posts : 1271
Join date : 2011-07-24
Age : 57
Location : Ringwood

Back to top Go down

Re: Gasket paper

Post by JONESEY on Mon Apr 16 2012, 23:03

If you get stuck for any bits give me a shout I have built up a big stores lol! lol! lol!
Jonesey

JONESEY
Admin

Posts : 2850
Join date : 2009-07-21
Age : 54
Location : Verwood, Dorset

Back to top Go down

Re: Gasket paper

Post by stationary stu on Tue Apr 17 2012, 09:32

JONESEY wrote:If you get stuck for any bits give me a shout I have built up a big stores lol! lol! lol!
Jonesey

It's just along the street from his big bank. lol! lol! lol!

Stu.

_________________
Engines are just like Pringles .... one is never enough.  Very Happy                                        I used to love tractors all I would ever think/talk about. Then one day out of the blue I went on to statinary engines, So you could say I'm an extractor fan.

stationary stu
Life Member
Life Member

Posts : 8962
Join date : 2009-07-21
Age : 58
Location : Stanley, Co. Durham.

Back to top Go down

Re: Gasket paper

Post by Abes on Tue Apr 17 2012, 19:19

Cheers mate ill hold you to that lol

_________________
affraid A stationary engine is like peeing your pants, everyone can see it but only you get that nice warm feeling: affraid

Abes
Admin

Posts : 1271
Join date : 2011-07-24
Age : 57
Location : Ringwood

Back to top Go down

Re: Gasket paper

Post by Sponsored content Today at 02:23


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum