www.stationaryengineforum.net
Please log in , the forum is open to guests who are now able to view every section, feel free to become a member , you will then be able to post and reply to topics.

Stuart turner thread type

View previous topic View next topic Go down

Stuart turner thread type

Post by Lewis MacRae on Fri Jun 28 2013, 16:44

Does anyone know the thread type that holds the head to the main casting on a Stuart Turner type A6 water pump?.The reason I ask is that I need new bolts as the old ones are to short and rock the head as the piston goes in and out.


Will be very appreciated if anyone nows

_________________
Lewis lol! , x2 Lister D, x1 IHC LAA, x1 Lister L, x1 Wolseley WDII, x1 Amanco Chore Boy, x1 Fairbanks Morse Z 3 HP, x1 Crossley 1030?

Lewis MacRae
Admin

Posts : 699
Join date : 2012-11-02
Location : Inverness, Scotland

Back to top Go down

Re: Stuart turner thread type

Post by Foden on Sat Jun 29 2013, 18:33

Bolts are 3/8th BSF and are 11/2 inches long.

Pete.

_________________
Too much to do, and so little time!!

Foden
Life Member
Life Member

Posts : 1123
Join date : 2009-11-04
Age : 65
Location : North Midlands

Back to top Go down

Re: Stuart turner thread type

Post by Lewis MacRae on Sat Jun 29 2013, 23:27

Thanks for that!

_________________
Lewis lol! , x2 Lister D, x1 IHC LAA, x1 Lister L, x1 Wolseley WDII, x1 Amanco Chore Boy, x1 Fairbanks Morse Z 3 HP, x1 Crossley 1030?

Lewis MacRae
Admin

Posts : 699
Join date : 2012-11-02
Location : Inverness, Scotland

Back to top Go down

Re: Stuart turner thread type

Post by Sponsored content Today at 18:30


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum