Villiers midget Mk3
Page 1 of 1
Villiers midget Mk3
Just got a copy of a manual and I think I have a midget mk3 with mark 2 points set up.
The Bakelite ignition terminal to the coil is broken and the bit remaining is seized in the casing. Any ideas on how to get this out?
Also, one end of the coil is seized on the magnet. The grub screw is removed but the coil isn't moving.
This is turning out to be a bit more complex than I thought it would be.
Thanks in advance for any ideas.
The Bakelite ignition terminal to the coil is broken and the bit remaining is seized in the casing. Any ideas on how to get this out?
Also, one end of the coil is seized on the magnet. The grub screw is removed but the coil isn't moving.
This is turning out to be a bit more complex than I thought it would be.
Thanks in advance for any ideas.
bluedog- Born to be wild
- Posts : 18
Join date : 2012-10-30
Age : 65
Location : Melbourne, Australia
Similar topics
» Villiers Midget Gudgeon Pin
» Villiers Midget mk2
» Villiers Midget only runs for a few seconds..
» Villiers Midget engine
» Villiers midget modification
» Villiers Midget mk2
» Villiers Midget only runs for a few seconds..
» Villiers Midget engine
» Villiers midget modification
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|