international
4 posters
Page 1 of 1
international
I have just acquired an international oil engine off flea-bay and I need a magneto if anyone has one or knows of an alternative
thank you for reading
John
thank you for reading
John
klausey- Born to be wild
- Posts : 25
Join date : 2013-12-22
Age : 70
Location : burnley lancashire
Re: international
The international was a nice one as I saw it on ebay, though it didn't look like there was enough paint for u to leave it as oily rag.
_________________
Lewis , x2 Lister D, x1 IHC LAA, x1 Lister L, x1 Wolseley WDII, x1 Amanco Chore Boy, x1 Fairbanks Morse Z 3 HP, x1 Crossley 1030?
Lewis MacRae- Admin
- Posts : 699
Join date : 2012-11-02
Location : Inverness, Scotland
Re: international
Lewis MacRae wrote:The international was a nice one as I saw it on ebay, though it didn't look like there was enough paint for u to leave it as oily rag.
yes it is very nice and complete apart from the magneto , every thing works and turns over so I don't think it will be a big job to get it running
klausey- Born to be wild
- Posts : 25
Join date : 2013-12-22
Age : 70
Location : burnley lancashire
Re: international
a IHC but what model ? or a link to the ebay auction would be good .
matt
matt
_________________
Reproduction amanco silencers made , contact me for details
matt
matt86- Admin
- Posts : 5577
Join date : 2011-03-29
Age : 37
Location : swindon/ faringdon
Re: international
matt86 wrote:a IHC but what model ? or a link to the ebay auction would be good .
matt
I don't know if anything can be learned from this
http://www.ebay.co.uk/itm/131087040719?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
klausey- Born to be wild
- Posts : 25
Join date : 2013-12-22
Age : 70
Location : burnley lancashire
Re: international
its an M by the looks of it
_________________
Lewis , x2 Lister D, x1 IHC LAA, x1 Lister L, x1 Wolseley WDII, x1 Amanco Chore Boy, x1 Fairbanks Morse Z 3 HP, x1 Crossley 1030?
Lewis MacRae- Admin
- Posts : 699
Join date : 2012-11-02
Location : Inverness, Scotland
Re: international
its a understrike m ( ignitor fired ) engine looks to be a 1.1/2 hp the mag you require is a ihc type R mag i believe .
matt
matt
_________________
Reproduction amanco silencers made , contact me for details
matt
matt86- Admin
- Posts : 5577
Join date : 2011-03-29
Age : 37
Location : swindon/ faringdon
Re: international
matt86 wrote:its a understrike m ( ignitor fired ) engine looks to be a 1.1/2 hp the mag you require is a ihc type R mag i believe .
matt
are they easily found matt ?
the engine must weigh at least 200pound plus maybe even 300 lbs plus and you say its only 1. 1/2 hp
it will be a very interesting project
klausey- Born to be wild
- Posts : 25
Join date : 2013-12-22
Age : 70
Location : burnley lancashire
Re: international
i have a 3 and was a rather big lump
mags are hard to find , doubt you find one in the uk , try having a look and join smokstak forum
matt
mags are hard to find , doubt you find one in the uk , try having a look and join smokstak forum
matt
_________________
Reproduction amanco silencers made , contact me for details
matt
matt86- Admin
- Posts : 5577
Join date : 2011-03-29
Age : 37
Location : swindon/ faringdon
Re: international
You could run it on a battery and lt coil until you find a mag, judging by the pics you're a fair way off that though. Looks like a nice project.
Biggusdannus- A credit to the forum
- Posts : 186
Join date : 2012-09-16
Similar topics
» International M trolley building & restoration
» International LAA
» International LA 1937
» International MType
» International Vacuum pump
» International LAA
» International LA 1937
» International MType
» International Vacuum pump
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|