Viilers engine identification
2 posters
Page 1 of 1
Viilers engine identification
Yes, I know this is a Stationary engine forum - just ignore the wheels OK?
From a bit of surfing I believe this is a Villiers MK11. Can anyone confirm?. Any hints, tips, look out for, gotchas, manuals to aid renovation gratefully received.
From a bit of surfing I believe this is a Villiers MK11. Can anyone confirm?. Any hints, tips, look out for, gotchas, manuals to aid renovation gratefully received.
_________________
Regards Paul
Tha can alus tell a Yorkshireman - but tha can't tell him much.
Woodsman- Admin
- Posts : 2655
Join date : 2014-08-24
Age : 72
Location : God's own county
Re: Viilers engine identification
its a villiers 11C 2 stroke ,
fitted to the remains of a allen sythe , F model of allen or oxford allen sythe,going off the daylight coming through the wheel and shape of wheel center , as the TS model, were solid centered wheel and one continues curve.
tyre size is usually 2.75 x 21
kev
fitted to the remains of a allen sythe , F model of allen or oxford allen sythe,going off the daylight coming through the wheel and shape of wheel center , as the TS model, were solid centered wheel and one continues curve.
tyre size is usually 2.75 x 21
kev
_________________
" IF YOU DONT DO ANYTHING " "" YOU'LL NEVER MAKES MISTAKES ""
kevjhnsn- Life Member
- Posts : 3596
Join date : 2011-02-10
Age : 45
Location : south cheshire
Re: Viilers engine identification
Hi Kev. Brilliant as usual. Manual seems a little hard to find though. Have tried most of the usual web sites without success.
_________________
Regards Paul
Tha can alus tell a Yorkshireman - but tha can't tell him much.
Woodsman- Admin
- Posts : 2655
Join date : 2014-08-24
Age : 72
Location : God's own county
Re: Viilers engine identification
Hi Kev,
Are you sure about Model F - I was thinking T?
Are you sure about Model F - I was thinking T?
_________________
Regards Paul
Tha can alus tell a Yorkshireman - but tha can't tell him much.
Woodsman- Admin
- Posts : 2655
Join date : 2014-08-24
Age : 72
Location : God's own county
Re: Viilers engine identification
thinking i was wrong to also from the new picture,
as the F has a 2x square bar and the TS has the one flat plate down to cutter bar
will have a root and see if i have a manual for the 11c
kev
as the F has a 2x square bar and the TS has the one flat plate down to cutter bar
will have a root and see if i have a manual for the 11c
kev
_________________
" IF YOU DONT DO ANYTHING " "" YOU'LL NEVER MAKES MISTAKES ""
kevjhnsn- Life Member
- Posts : 3596
Join date : 2011-02-10
Age : 45
Location : south cheshire
Re: Viilers engine identification
Top man. Thanks Kev.
_________________
Regards Paul
Tha can alus tell a Yorkshireman - but tha can't tell him much.
Woodsman- Admin
- Posts : 2655
Join date : 2014-08-24
Age : 72
Location : God's own county
Similar topics
» villiers " the V engine " mk10 year 1945 W/D war deparment spec engine
» Petters engine identification
» Another nice engine to restore - Wolseley Style 1 Engine No. 1993
» Identification 2 cylinder open crank engine
» Petter A1 by first time restorer
» Petters engine identification
» Another nice engine to restore - Wolseley Style 1 Engine No. 1993
» Identification 2 cylinder open crank engine
» Petter A1 by first time restorer
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|