www.stationaryengineforum.net
Please log in , the forum is open to guests who are now able to view every section, feel free to become a member , you will then be able to post and reply to topics.

Shafty D petrol tank Lid

View previous topic View next topic Go down

Shafty D petrol tank Lid

Post by Matth92 on Tue Oct 21 2014, 18:15

Thought you might like to see what I have been making for my D, apologies for crap photos!








_________________
Cheers, Matt
3 X Shafty Lister D's, Fowler 1PA, Wolseley WD2, Ruston PT, Bamford EG1, Conord F2, Superbloc 3hp, Hartop M, Wrekin mill, and a girt dairy setup!
PROPER JOB Very Happy Very Happy

Matth92
Life Member
Life Member

Posts : 694
Join date : 2012-05-10
Location : Sunny dorset

Back to top Go down

Re: Shafty D petrol tank Lid

Post by Locknut on Tue Oct 21 2014, 18:47

Hi Matt,
Whow that looks great!The knurling on the rim really sets it off.
Well done you.
Kev.

Locknut
A true Stationary engine owner
A true Stationary engine owner

Posts : 166
Join date : 2013-02-20
Location : South Devon

Back to top Go down

Re: Shafty D petrol tank Lid

Post by Matth92 on Tue Oct 21 2014, 19:00

I gave up trying to find a tap as it is a funny thread ( 1 1/4 x 16 TPI 55 degrees) so I ground an internal grooving tip to 55 and used that, the knurling is too fine but its the only knurling tool we have so itll have to do!

_________________
Cheers, Matt
3 X Shafty Lister D's, Fowler 1PA, Wolseley WD2, Ruston PT, Bamford EG1, Conord F2, Superbloc 3hp, Hartop M, Wrekin mill, and a girt dairy setup!
PROPER JOB Very Happy Very Happy

Matth92
Life Member
Life Member

Posts : 694
Join date : 2012-05-10
Location : Sunny dorset

Back to top Go down

Re: Shafty D petrol tank Lid

Post by Sponsored content Today at 03:48


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum