www.ukengineforum.forumotion.com
Please log in , the forum is open to guests who are now able to view most sections, feel free to become a member , you will then be able to post and reply to topics.

Join the forum, it's quick and easy

www.ukengineforum.forumotion.com
Please log in , the forum is open to guests who are now able to view most sections, feel free to become a member , you will then be able to post and reply to topics.

1922 Witte Model B 2HP

Go down

1922 Witte Model B 2HP Empty 1922 Witte Model B 2HP

Post by Carmel Kid Sun Feb 15 2015, 23:15

Needs work and parts...Governor weights and linkage, magneto parts, and much more knowledge from me about these engines.  This was my Dad's.  New to me and my brothers.  With luck, it will run again. It's in my garage for now, so doing what I can.  Has a Bosch magneto and I suspect probably had a points cover at one time. (not like the piece of plastic I put over it)  Laughing  The mag tower lead is broken and just a spring when I took it off.  No plug wire, I'm guessing the plug wire just clips to the screw that goes into the tower?  All new to me.  Any guidance from this group will be appreciated.

1922 Witte Model B 2HP Witte_11
Carmel Kid
Carmel Kid
I really need to post more
I really need to post more

Posts : 8
Join date : 2015-01-13

Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum