Please log in , the forum is open to guests who are now able to view every section, feel free to become a member , you will then be able to post and reply to topics.

JAP 2A big end questions

View previous topic View next topic Go down

JAP 2A big end questions

Post by callum12 on Wed Feb 04 2015, 16:09

hi all,
I have just sent the crank off my JAP 2A to be reground along with the con rod. in order for the engineer to re grind the crank he must know what the original size of the crank should be, anyone know? he would also like to know what size the big end is without the bearings as the shells close up before the big end does. so does anyone know what size the big end is bored to?
thanks for your help and i look forward to your replies,

Laughing  Laughing if it ain't broke it doesn't have any special features yet. Laughing  Laughing

A credit to the forum
A credit to the forum

Posts : 249
Join date : 2013-10-03
Age : 18

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

Permissions in this forum:
You cannot reply to topics in this forum