www.ukengineforum.forumotion.com
Please log in , the forum is open to guests who are now able to view most sections, feel free to become a member , you will then be able to post and reply to topics.

Join the forum, it's quick and easy

www.ukengineforum.forumotion.com
Please log in , the forum is open to guests who are now able to view most sections, feel free to become a member , you will then be able to post and reply to topics.

Petter A1 piston

2 posters

Go down

Petter A1 piston Empty Petter A1 piston

Post by rich07961 Sat May 02 2015, 19:49

Can anyone tell me if this is standard piston or over size for my A1



Petter A1 piston Imag0629
rich07961
rich07961
A credit to the forum
A credit to the forum

Posts : 287
Join date : 2015-03-30
Age : 72
Location : Calne Wilts

Back to top Go down

Petter A1 piston Empty Re: Petter A1 piston

Post by Chippie Sun May 03 2015, 13:45

A quick way would be to measure it with a vernier.......

Usually would say on top if it's oversize.... +10, +20 etc.....

Chippie
Born to be wild
Born to be wild

Posts : 49
Join date : 2011-03-17
Age : 65
Location : East Yorkshire

Back to top Go down

Petter A1 piston Empty Re: Petter A1 piston

Post by rich07961 Sun May 03 2015, 16:47

Hi chippie, unfortunately do not have a vernier and these numbers etc on piston is all there is Oh except for DD on bottom

_________________
Success is the ability to go from one failure to the next without any loss of enthusiasm  Very Happy
rich07961
rich07961
A credit to the forum
A credit to the forum

Posts : 287
Join date : 2015-03-30
Age : 72
Location : Calne Wilts

Back to top Go down

Petter A1 piston Empty Re: Petter A1 piston

Post by Chippie Sun May 03 2015, 17:12

Wild guess, I'd say the number on the top is a Petter part number - the S signifying Standard......
It needs measuring for definite before you go buying rings.....

Chippie
Born to be wild
Born to be wild

Posts : 49
Join date : 2011-03-17
Age : 65
Location : East Yorkshire

Back to top Go down

Petter A1 piston Empty Re: Petter A1 piston

Post by rich07961 Sun May 03 2015, 17:32

Will try and find a mate that has a vernier to measure, I have also sent an email to Jim a ex petter engineer
to see if he can help. Many thanks

_________________
Success is the ability to go from one failure to the next without any loss of enthusiasm  Very Happy
rich07961
rich07961
A credit to the forum
A credit to the forum

Posts : 287
Join date : 2015-03-30
Age : 72
Location : Calne Wilts

Back to top Go down

Petter A1 piston Empty Re: Petter A1 piston

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum