www.stationaryengineforum.net
Please log in , the forum is open to guests who are now able to view every section, feel free to become a member , you will then be able to post and reply to topics.

My first project Villiers C12 Simplite Mk4 Pumpset

View previous topic View next topic Go down

My first project Villiers C12 Simplite Mk4 Pumpset

Post by mayunmarlady on Sat May 30 2015, 14:04

This is my Villiers C12 project
It started very easily, and runs very steady.
is this electronic ignition? and how can i date it?
But its missing a few parts, a tank strap and the rope starter mesh guard but i think it should have a recoil starter?Would you know?and the cowling is pretty beat up, if anyone has spares i would buy them if you want to sell and if anyone can point me in the right direction for manuals or for the pump i would be most grateful. I hope the pictures have worked  Rolling Eyes
[/url]" />
" />
" />" />

mayunmarlady

Posts : 2
Join date : 2015-05-28

Back to top Go down

Re: My first project Villiers C12 Simplite Mk4 Pumpset

Post by cancunia on Thu Jan 07 2016, 13:46

How goes it with this project?

There are manuals for the C12 E (Electronic Ignition) on the Winget site

http://www.winget.co.uk/UserGuide.aspx#15.

AFAIK, the only difference will be the ignition system which uses points on the older engines.

This thread on the Kitchen Garden website has the C12 Breaker Ignition pages.

http://www.kitchengarden.co.uk/forum/viewtopic.php?f=10&t=130


I bought one of these units inc the pump last week. It's taken a few days to get the engine running, but it now starts really well. In fact it seems to start better when hot than the C12 E that I have on my Howard Bantam. I have only seen a hard copy manual for the pump, but Selwood is still going and look to be still making a version of the Simplite Mk4

http://www.selwood.co.uk/wp-content/uploads/2013/04/7-pd-pumps-p618.pdf







cancunia
Born to be wild
Born to be wild

Posts : 17
Join date : 2014-02-19

Back to top Go down

Re: My first project Villiers C12 Simplite Mk4 Pumpset

Post by cancunia on Thu Jan 07 2016, 13:52

Ah, here's a brochure.

http://www.selwood.co.uk/wp-content/uploads/2013/01/PD50.pdf


cancunia
Born to be wild
Born to be wild

Posts : 17
Join date : 2014-02-19

Back to top Go down

Re: My first project Villiers C12 Simplite Mk4 Pumpset

Post by cancunia on Thu Jan 07 2016, 14:20

Selwood's have sent me a manual & parts list. PM me if you'd like a copy.

cancunia
Born to be wild
Born to be wild

Posts : 17
Join date : 2014-02-19

Back to top Go down

Re: My first project Villiers C12 Simplite Mk4 Pumpset

Post by Sponsored content Today at 02:24


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum