www.ukengineforum.forumotion.com
Please log in , the forum is open to guests who are now able to view most sections, feel free to become a member , you will then be able to post and reply to topics.

Join the forum, it's quick and easy

www.ukengineforum.forumotion.com
Please log in , the forum is open to guests who are now able to view most sections, feel free to become a member , you will then be able to post and reply to topics.

Glass reproduction, wine glass type.

+6
JONESEY
ian webb
billypurves
Bamfordlad
DanBoy
ukluke
10 posters

Go down

Glass reproduction, wine glass type. Empty Glass reproduction, wine glass type.

Post by ukluke Tue Apr 24 2012, 20:10

I'v taken my oilrer glass from my Ruston AP to see if it can be reproduced, (wine glass type) more info tomorrow on the doings. For now though, does anyone know of a source for these that i'v not found, i have looked. I'v done searches on here and other sites, but found nothing, short of buying a complete oiler from feepay.
Anyway, i had a chat with a glass blower yesterday and it was quite posotive. Today i took in the glass and had a propper chat. It seems blowing glass isn't as romantic as it's often shown on TV. Were looking at some thing formed from pre-made tube. The closest size tube on the rack was just under size, by about 1mm. I don't think this will be a problem, also it's a thinner wall. All i'v specified is the base has to have the same shape, not too woried about thickness, as long as it looks the part. The tube is turned on a type of lathe with several blow torch nozels pointed at it, in the right manner. The glass is manipulated into shape by hand, by the way of several formers and paddles, i'm told the hard part will be making the base as thick and deep as the original. As for cost, she couldn't / wouldn't even give a guide. But, i did tell her if it was too expensive to make the two i need she could possibly make more, so i could try to get some money back by selling them on. The more you make the cheaper the individual could be, perhaps ?
So, i'm asking, if they can be made, and at a reasonable cost, is there a market for them. Does anyone want one now or for a future restoration, or just to have a spare on the shelf ? What's the opinion on selling them on feepay, will they sell ?
They will not be an exact visual match, but will be as close as can be acheived with modern production. She thought the original was formed in a mold also, not blown and cut to lenght. I'm hoping to get two so they are a match on the engine, no point having one new one on the engine and one old one that's been super glued back together.
Were these a common glass used by several companies, or bespoke to Ruston ? Anyone know ? Did RH buy the complete oiler in from a suplier ? If they were used by others these glass's will fit other makes of engine.
Rough size is 65mm total hight, 50mm outside the top, and 27mm outside the base.
I'll know more tomorrow i hope. There is no time scale on this, i told her i was in no rush, don't need to rush her for it to cost more. But, i did say if the two were too expensive more was an optoin, provided cost's were still reasonable.

Glass reproduction, wine glass type. 170420121072-Copy


Last edited by ukluke on Sun May 13 2012, 20:34; edited 1 time in total
ukluke
ukluke
Born to be wild
Born to be wild

Posts : 29
Join date : 2012-04-06
Age : 46
Location : Scunthorpe

Back to top Go down

Glass reproduction, wine glass type. Empty Re: Glass reproduction, wine glass type.

Post by Guest Wed Apr 25 2012, 11:55

If it was my engine I'd write to Ray Hooley and see if he had a supply for them or if he wanted to buy any to sell on.

Stu.

Guest
Guest


Back to top Go down

Glass reproduction, wine glass type. Empty Re: Glass reproduction, wine glass type.

Post by DanBoy Wed Apr 25 2012, 18:10

I'm sure I read somewhere of someone cutting the bottom off a suitable glass bottle.

_________________
I intend to live forever - so far, so good! bom
DanBoy
DanBoy
Life Member
Life Member

Posts : 622
Join date : 2012-01-09
Location : Burntwood, Staffordshire

Back to top Go down

Glass reproduction, wine glass type. Empty Re: Glass reproduction, wine glass type.

Post by Bamfordlad Wed Apr 25 2012, 20:22

That would work for a parallel glass oiler but have you ever seen a glass bottle that could be made into a wine glass oiler glass.

Bamfordlad
Expert
Expert

Posts : 59
Join date : 2010-02-05

Back to top Go down

Glass reproduction, wine glass type. Empty Re: Glass reproduction, wine glass type.

Post by ukluke Mon Apr 30 2012, 20:05

I got the glass back today, bad news, the prototype cost £27. There won't be any more at that price. I paid up and took it, she says she might be able to make a few "much cheaper" in a few months when she's not the new girl any more, she only worked there 6 weeks. Shame, as it's a very good match -

Glass reproduction, wine glass type. DSCF0605

Glass reproduction, wine glass type. DSCF0606

Glass reproduction, wine glass type. DSCF0609

Glass reproduction, wine glass type. 300420121134
ukluke
ukluke
Born to be wild
Born to be wild

Posts : 29
Join date : 2012-04-06
Age : 46
Location : Scunthorpe

Back to top Go down

Glass reproduction, wine glass type. Empty Re: Glass reproduction, wine glass type.

Post by billypurves Mon Apr 30 2012, 21:41

I do not suppose that is a bad price for what you got when you take into consideration the cost of someones time. Still a wee bit painful wallet wise but that will soon be forgotten!!
billypurves
billypurves
A credit to the forum
A credit to the forum

Posts : 362
Join date : 2010-07-01
Age : 68
Location : Glenrothes, Fife.

Back to top Go down

Glass reproduction, wine glass type. Empty Re: Glass reproduction, wine glass type.

Post by ukluke Mon Apr 30 2012, 22:29

Perhaps i should just buy one ? -

http://www.ebay.co.uk/itm/Hornsby-or-Ruston-drip-feed-oiler-/330725049839?pt=UK_BOI_FarmingEquipment_RL&hash=item4d00bfc5ef
ukluke
ukluke
Born to be wild
Born to be wild

Posts : 29
Join date : 2012-04-06
Age : 46
Location : Scunthorpe

Back to top Go down

Glass reproduction, wine glass type. Empty Re: Glass reproduction, wine glass type.

Post by ian webb Tue May 01 2012, 09:06

Hi, i think that was very reasonable when you consider the price of an oiler, to actually have someting made taking into account time and materials expenses £27.00 is nothing, i would have been well chuffed especially seeing how good a match it is,
Ian

_________________
Nelson Jumbo 1 3/4hp ,Petter M 3hp appletop, 1940 LISTER D with sheep shearing, 1951 Lister D reverse rotation, H1 H2 H3 pumps, Climax no2 pump,
ian webb
ian webb
Life Member
Life Member

Posts : 657
Join date : 2009-08-27
Age : 58
Location : christchurch dorset

Back to top Go down

Glass reproduction, wine glass type. Empty Re: Glass reproduction, wine glass type.

Post by Guest Tue May 01 2012, 11:26

I know it sounds a lot but how much would you pay per hour for any craftsman, as long as your happy with the end result that's all that matters.
Have it as a birthday pressie to yourself.

Stu.

Guest
Guest


Back to top Go down

Glass reproduction, wine glass type. Empty Re: Glass reproduction, wine glass type.

Post by ukluke Tue May 01 2012, 22:10

I'm happy with it, very happy with it, it's so good a copy. I'm only saying for that price i won't be having any more made. Unless, anyone else want's one making up for the same price, i can sort it for you, at no extra cost obviously.
Luke
ukluke
ukluke
Born to be wild
Born to be wild

Posts : 29
Join date : 2012-04-06
Age : 46
Location : Scunthorpe

Back to top Go down

Glass reproduction, wine glass type. Empty Re: Glass reproduction, wine glass type.

Post by JONESEY Mon May 07 2012, 17:07

For a one off that's a fantastic price looks the dogs bollocks too
Jonesey
JONESEY
JONESEY
Admin

Posts : 2848
Join date : 2009-07-21
Age : 61
Location : Verwood, Dorset

Back to top Go down

Glass reproduction, wine glass type. Empty Had a go my self :)

Post by ukluke Sun May 13 2012, 20:50

I seen the wife having one of these little bottles and it got me thinking, (there are two small sizes, this is the larger Blossom one not the Gallo one) If i could learn to cut them i could make a drip feed glass. These are on the shelf in Tesco's (however, other mass-market rob-shops are available)

Glass reproduction, wine glass type. 130520121179

Top cut off, i broke it but not bad for a first try, the wife thinks it's good cos she get's to have another bottle while i practice.
Glass reproduction, wine glass type. 130520121175

The base part of the oiler is a perfect fit, i know it's broken but it dosen't get much better than this.
I used a stone grinding disc in the 4" grinder to finish the edge.
Glass reproduction, wine glass type. 130520121177

Glass reproduction, wine glass type. 130520121180

I'v been watching bottle cutting vid's on youtube, with a bit more practice i'll get it. I hope the wife appreciates my dedication to getting this right !

Now i know what your all thinking , he's throwing some time at this ?!?! Well, yes. But i painted the garden fence, (all 16 panels, both side's) and cut the lawn today, before i had a go. So the wife really can't complain !
ukluke
ukluke
Born to be wild
Born to be wild

Posts : 29
Join date : 2012-04-06
Age : 46
Location : Scunthorpe

Back to top Go down

Glass reproduction, wine glass type. Empty Re: Glass reproduction, wine glass type.

Post by mike d Mon May 14 2012, 00:00

well good luck with it all..
mike..

_________________
NOT HERE FOR A LONG TIME, JUST HERE FOR A GOOD TIME
SEEMS TO BE WORKING...
mike d
mike d
Life Member
Life Member

Posts : 7594
Join date : 2009-08-26
Age : 62
Location : DORSET..BORN AND BRED AND PROUD OF IT.

Back to top Go down

Glass reproduction, wine glass type. Empty Re: Glass reproduction, wine glass type.

Post by Guest Mon May 14 2012, 12:09

Good idea hope it works for you and sounds as if your keeping her in doors happy at the same time Laughing

Stu.

Guest
Guest


Back to top Go down

Glass reproduction, wine glass type. Empty Re: Glass reproduction, wine glass type.

Post by ian webb Mon May 14 2012, 12:25

hmmm seems my wife has your wifes problem, mine seems to keep presenting me with empty Gallo or Blossom hill white grenache bottles, i knew there must be a use somewhere for them lol,
Ian

_________________
Nelson Jumbo 1 3/4hp ,Petter M 3hp appletop, 1940 LISTER D with sheep shearing, 1951 Lister D reverse rotation, H1 H2 H3 pumps, Climax no2 pump,
ian webb
ian webb
Life Member
Life Member

Posts : 657
Join date : 2009-08-27
Age : 58
Location : christchurch dorset

Back to top Go down

Glass reproduction, wine glass type. Empty Re: Glass reproduction, wine glass type.

Post by Guest Mon May 14 2012, 12:28

ian webb wrote:hmmm seems my wife has your wifes problem, mine seems to keep presenting me with empty Gallo or Blossom hill white grenache bottles, i knew there must be a use somewhere for them lol,
Ian

Yes Ian when she hands you an empty wine bottle and says "stick it" she means in the shed to make oilers out of them. lol! lol! lol!

Stu.

Guest
Guest


Back to top Go down

Glass reproduction, wine glass type. Empty Re: Glass reproduction, wine glass type.

Post by ian webb Mon May 14 2012, 12:34

Ahhh now i get it, stick it where the sun dont shine means out in my dark shed, and i thought she was being rude to me all this time,
Ian

_________________
Nelson Jumbo 1 3/4hp ,Petter M 3hp appletop, 1940 LISTER D with sheep shearing, 1951 Lister D reverse rotation, H1 H2 H3 pumps, Climax no2 pump,
ian webb
ian webb
Life Member
Life Member

Posts : 657
Join date : 2009-08-27
Age : 58
Location : christchurch dorset

Back to top Go down

Glass reproduction, wine glass type. Empty Re: Glass reproduction, wine glass type.

Post by mike d Mon May 14 2012, 22:29

stationary stu wrote:Good idea hope it works for you and sounds as if your keeping her in doors happy at the same time Laughing

Stu.

well if it does there will be a lot of people trying it..
saves a shed load of money for shore..
mike....

_________________
NOT HERE FOR A LONG TIME, JUST HERE FOR A GOOD TIME
SEEMS TO BE WORKING...
mike d
mike d
Life Member
Life Member

Posts : 7594
Join date : 2009-08-26
Age : 62
Location : DORSET..BORN AND BRED AND PROUD OF IT.

Back to top Go down

Glass reproduction, wine glass type. Empty Re: Glass reproduction, wine glass type.

Post by emerald Wed Feb 10 2016, 03:57

If you want a good Oiler Glass, come to an expert.

emerald

Posts : 4
Join date : 2016-02-09
Location : Adelaide

Back to top Go down

Glass reproduction, wine glass type. Empty Re: Glass reproduction, wine glass type.

Post by StewartH Wed Feb 10 2016, 16:08

Ray - you're going to have to emigrate mate - you're just too far away for our glass blowing needs in the UK! - Not sure you'd approve Smile

But a big welcome to the Forum as well - good to have your skills onboard!

Best

Hamish
StewartH
StewartH
A credit to the forum
A credit to the forum

Posts : 410
Join date : 2013-07-04
Location : Hampshire

Back to top Go down

Glass reproduction, wine glass type. Empty Re: Glass reproduction, wine glass type.

Post by emerald Wed Feb 10 2016, 22:28

I am only 24 hours away by plane!!! I can easily post the oiler glasses.

emerald

Posts : 4
Join date : 2016-02-09
Location : Adelaide

Back to top Go down

Glass reproduction, wine glass type. Empty Re: Glass reproduction, wine glass type.

Post by StewartH Thu Feb 11 2016, 08:53

Cant argue with that thinking! - thanks for being so accommodating! - the dark art of glass blowing is interesting - if you've done any engine projects (or simply mechanical) I for one would be delighted if you posted a few pics (have to be on here as a member for a week or so) so we can understand the process you go through - I guess its not all exotic venetian glass blowing workshops and time off to drink wonderful red wine! - or in your case exotic locations (Adelaide) and drinking wonderful Aussie red wine... Smile Smile Smile
Best

Hamish
StewartH
StewartH
A credit to the forum
A credit to the forum

Posts : 410
Join date : 2013-07-04
Location : Hampshire

Back to top Go down

Glass reproduction, wine glass type. Empty Re: Glass reproduction, wine glass type.

Post by Appletop Thu Feb 11 2016, 09:56

[quote="ukluke"]I got the glass back today, bad news, the prototype cost £27. There won't be any more at that price.[/quote]


That's cheap!! I got quoted a price of £80 for one a similar size at Astle a few years back, I left it and used araldite to glue it back together....
Appletop
Appletop
Life Member
Life Member

Posts : 1479
Join date : 2010-01-02
Age : 56
Location : Just outside Diss

Back to top Go down

Glass reproduction, wine glass type. Empty Re: Glass reproduction, wine glass type.

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum