www.stationaryengineforum.net
Please log in , the forum is open to guests who are now able to view every section, feel free to become a member , you will then be able to post and reply to topics.

villiers c25 big end shells

View previous topic View next topic Go down

villiers c25 big end shells

Post by lewis66 on Wed Dec 23 2015, 20:24

hi can anyone point me in the direction of a supplier for villiers c25 big end shells , i stripped my engine today and it's in good nick it just needs rings and bearing shells , i have found new rings no problem , even the coil with it's cracked insulation works

lewis66
I really need to post more
I really need to post more

Posts : 6
Join date : 2015-12-22

Back to top Go down

Re: villiers c25 big end shells

Post by Woodsman on Thu Dec 24 2015, 10:31

Try L&S Engineers:

http://www.lsengineers.co.uk

_________________
Regards Paul
Tha can alus tell a Yorkshireman - but tha can't tell him much.

Woodsman
Life Member
Life Member

Posts : 553
Join date : 2014-08-24

Back to top Go down

villiers parts

Post by reiver on Thu Dec 24 2015, 11:18

hello
Have you tried jon cruse at the mower centre Hailsham or villiersparts? You could also try meetens, I believe they can be more expensive

reiver
I really need to post more
I really need to post more

Posts : 5
Join date : 2012-02-18
Location : clackmannan

Back to top Go down

Re: villiers c25 big end shells

Post by Sponsored content Today at 16:00


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum