www.stationaryengineforum.net
Please log in , the forum is open to guests who are now able to view every section, feel free to become a member , you will then be able to post and reply to topics.

Lister A (4 inch bore) Hopper

View previous topic View next topic Go down

Lister A (4 inch bore) Hopper

Post by mayog on Wed Oct 19 2016, 11:00

Still seeking a 4 inch bore hopper for a Lister A

any help appreciated,

Geoff

mayog
Born to be wild
Born to be wild

Posts : 45
Join date : 2016-02-19

Back to top Go down

Re: Lister A (4 inch bore) Hopper

Post by rich07961 on Fri Oct 21 2016, 19:41

Hi Geoff,

I am stripping out a Lister A tomorrow as unable to sell as a complete engine and will be a good source for spares for mine,
its a spec 16 which may have the 3 3/4 bore but if you had the piston as well it would fit your crank as they are the same, this engine had good compression as well, but might be as well to get new rings which are available from Cox and Turner, will give you more info when stripped.

Regards

Richard

rich07961
A credit to the forum
A credit to the forum

Posts : 244
Join date : 2015-03-30
Age : 65
Location : Calne Wilts

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum