www.stationaryengineforum.net
Please log in , the forum is open to guests who are now able to view every section, feel free to become a member , you will then be able to post and reply to topics.

information needed to use perkins engine to drive sawbench

View previous topic View next topic Go down

information needed to use perkins engine to drive sawbench

Post by derwen1959 on Mon Jan 16 2017, 23:07

i have a sawbench which was bought by my late father 60 years ago and I want to mount it on a frame with axle and I know of a perkins 4107 which was used to drive a drier of some sort. I would like to know what is best RPM for sawblade there is flat belt pulley on saw bench and engine has V pulley I am thinking there will need some sort of pulley between engine and saw bench also what is minimum distance for best driving between flat pulleys regards Ivor

derwen1959

Posts : 3
Join date : 2017-01-16

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum