New member - owner of two Lister D engines, a Climax 2 pump and a rolling mill

Hi All
No prior experience of stationary engines.
However, I have re-homed two Lister D engines, a Climax 2 pump and a rolling mill from my 92 yr old father and an old Perkins twin from the next door farm.
First up is to get some advice on how to get the working Lister D to drive the Climax 2 pump - so any pointers to threads that might help would be most welcome.
Cheers and happy new year.

Hello and welcome! (and a happy new year)

There are lots of experienced people on here, I'm sure they'll get you sorted.

Hi and a very warm welcome to the forum.
As Matt says, plenty of advice to be had here (some of it may even be useful )
Have a look the Similar Topics at the bottom of the page.

I can let you have a Lister D & DK manual if needed.

Good luck!