www.stationaryengineforum.net
Please log in , the forum is open to guests who are now able to view every section, feel free to become a member , you will then be able to post and reply to topics.

Villiers MK20 - yes another one !

View previous topic View next topic Go down

Villiers MK20 - yes another one !

Post by Woodsman on Wed Jul 06 2016, 13:27

Just picked up a Villiers MK20 Missing a few bits so I've posted in Wanted. Sounds a bit wheezy so I suspect a ring or two may be shot.



Yup - head off and reason for wheezing becomes apparent. Doesn't bode well Sad


Oh dear..


Luckily I have a spare piston and, between to two, a set of rings. Strangely the bore isn't as bad as  I expected. Just a small nick at the top


Do we think it will run or should I start searching for a new barrel?

_________________
Regards Paul
Tha can alus tell a Yorkshireman - but tha can't tell him much.

Woodsman
Life Member
Life Member

Posts : 553
Join date : 2014-08-24

Back to top Go down

Re: Villiers MK20 - yes another one !

Post by rich07961 on Wed Jul 06 2016, 19:10

Hi Paul, I think that where the nick is it will catch the top ring when the ring gets round to the gap and could cause problems. but also not that clear picture of damage, as it happens do have a barrel here, as for your bits cannot come up with a price, so if you come up with a figure that suits you, I will go with that, I have been able to get whats left of bolt in head bolt so that available to.

Regards


Richard

rich07961
A credit to the forum
A credit to the forum

Posts : 242
Join date : 2015-03-30
Age : 65
Location : Calne Wilts

Back to top Go down

Re: Villiers MK20 - yes another one !

Post by Woodsman on Thu Jul 07 2016, 06:54

Cheers Richard. Will PM you later today.

_________________
Regards Paul
Tha can alus tell a Yorkshireman - but tha can't tell him much.

Woodsman
Life Member
Life Member

Posts : 553
Join date : 2014-08-24

Back to top Go down

Re: Villiers MK20 - yes another one !

Post by Woodsman on Wed Jul 13 2016, 15:27

Huge thanks to Richard for letting me have parts needed at a very reasonable price  - plus some other bits foc. Very Happy
Seems this project is a goer after all cheers

_________________
Regards Paul
Tha can alus tell a Yorkshireman - but tha can't tell him much.

Woodsman
Life Member
Life Member

Posts : 553
Join date : 2014-08-24

Back to top Go down

Re: Villiers MK20 - yes another one !

Post by Sponsored content Today at 03:52


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum