Re: Amanco Hired man starting issues

by lister dan Tue Jul 30 2013, 19:16

Is it running now?
Cheers Daniel.

by Guest Tue Jul 30 2013, 20:46

lister dan wrote:Is it running now?
Cheers Daniel.

RE magnetised mag all fitted, flooded the carb and nothing , all
I got now is pulled muscles in my chest from pulling the flywheels over, pissed off to say the least

Janner

by Guest Sun Aug 11 2013, 17:26

https://www.youtube.com/watch?v=bqzWeuC4vVg&feature=c4-overview&list=UUCO2laBctz2pL3NKUhIC8zg

Had a mate pop round with batt and coil and fired first time, we reckon the igniter is the fault as it will not run with the batt lead off and the mag lead connected, the mag has been checked and re magnetised, any idea on who can rebuild an igniter chaps ??

Very happy to hear it running though, runs good bounce

by lister dan Sun Aug 11 2013, 17:28

janner wrote: https://www.youtube.com/watch?v=bqzWeuC4vVg&feature=c4-overview&list=UUCO2laBctz2pL3NKUhIC8zg

Had a mate pop round with batt and coil and fired first time, we reckon the igniter is the fault as it will not run with the batt lead off and the mag lead connected, the mag has been checked and re magnetised, any idea on who can rebuild an igniter chaps ??

Very happy to hear it running though, runs good

Jonneys on here can i think, or he will know somebody that does.
Cheers

by Appletop Sun Aug 11 2013, 17:30

Igniter rebuilding isn't that hard Jan, just need some mica washers and maybe some contacts for the end. I reckon if you have issues with the igniter you could strip it yourself and rebuild it, about the only thing to go wrong is busted springs or tracking to earth through a crack in the insulation.

by Guest Sun Aug 11 2013, 17:35

Where can I get the mica washers and tube from ? Cheers

by matt86 Sun Aug 11 2013, 20:49

janner wrote:Where can I get the mica washers and tube from ? Cheers

hit and miss enterprises or starbolts .

matt

by Guest Sun Aug 11 2013, 21:22

matt86 wrote:
janner wrote:Where can I get the mica washers and tube from ? Cheers
hit and miss enterprises or starbolts .

matt

Thanks Matt, anywhere in the UK ?

by matt86 Sun Aug 11 2013, 22:03

janner wrote:
matt86 wrote:
janner wrote:Where can I get the mica washers and tube from ? Cheers
hit and miss enterprises or starbolts .

matt
Thanks Matt, anywhere in the UK ?

not as far as i know , speak to starbolts they will be with u within 2 weeks .

matt

by Sponsored content