Villiers 25HS powered generator
+7
mattblack
Woodsman
blue cat
maryalice
Appletop
RichieR
Alanengine
11 posters
Page 4 of 4
Page 4 of 4 • 1, 2, 3, 4
Re: Villiers 25HS powered generator
Thanks guys! Apart from final setup I am working on a shorter exhaust. It protrudes out the side of the generator set and is quite vulnerable to getting knocked. In fact when I got it one of the manifold studs had broken part of the cylinder casting I guess due to it probably having a clout.
Got some 3/4 BSP fittings which I am using to fabricate an easily removable silencer to be as short as possible to avoid any repetition of the problem.
Alan
Got some 3/4 BSP fittings which I am using to fabricate an easily removable silencer to be as short as possible to avoid any repetition of the problem.
Alan
Alanengine- A credit to the forum
- Posts : 461
Join date : 2020-11-21
Re: Villiers 25HS powered generator
Nice job Alan. Well done.
_________________
Regards Paul
Tha can alus tell a Yorkshireman - but tha can't tell him much.
Woodsman- Admin
- Posts : 2692
Join date : 2014-08-24
Age : 73
Location : God's own county
Page 4 of 4 • 1, 2, 3, 4
Similar topics
» Petter AC1 powered boat
» Petter AC1 powered generator
» alcon pump set..jap engine powered.
» Propane Gas Powered Villiers MK15
» villiers generator
» Petter AC1 powered generator
» alcon pump set..jap engine powered.
» Propane Gas Powered Villiers MK15
» villiers generator
Page 4 of 4
Permissions in this forum:
You cannot reply to topics in this forum